Gaggia Classic Steam Valve Protection Disk
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Steam valve protection disk with a split design that can be tightened by screw.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 169
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This is a steam valve protection disk model for Gaggia Classic. It has a split design so you can have a M2 screw and nut to have it tightened.
I have two versions created. One can go directly to the steam valve. The other has a slightly larger inner diameter so it can be used with extra padding. I found a strip of sandpaper works well to enhance the grip.
WARNING: This model should best be printed with a heat resistant filament such as ABS or Nylon. If you use PLA or PETG, expect the disk to become soft and deform loose after you heat up the machine.