Battery adapter Womax S20V to Parkside tools X20V
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Battery adapter Womax S20V to Parkside tools X20V ( the green ones )
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 178
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
The size of battery metal contacts is 15 x 13 mm , thickens 0.8 mm
A dry wall metal supports are good alternative for metal sheet , for contacts.
A wood screw betwine 20 - 30 mm depends on tool handle size on the other side , for securing to tool.
Solder metal contact outside of plastic adapter and then insert in print . A 60 Watts or higher soldering iron is a good idea.
Some tools need a third pin that detect battery temperature , a work around is to use 10 000 ohms ( 10K ) ¼ Watts , connect betwine signal wire third one ( middle connection ) and battery minus usually, some use plus connection , so try with which one works . it is a 10 000 ohms resistor very very little chances of shorting something.
Once inserted a 3d printer pencil or a glue gun are good for securing connections.