CR2032/CR2015/CR2025/CR20XX Battery Insert - Multiboard
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
put cr2032 batteries in a 1x1x1 bin
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 17
- Wydruki
- 0
- Wyświetlenia
- 125
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Needed a bunch of these batteries for my excessive amount of AirTags. Holds 22 comfortably, 24 if you're okay with the top ones potentially sliding out.
Holes are 20.5mm if you want to try using it to hold other cylindrical objects.
Didn't feel like switching to my desktop to do real CAD, so this is all done with subtraction volumes in prusaslicer. Not the most pleasant to use with some sharp points, but good enough.
Intended to use with 1x1x1 Bin
It's unclear to me if the spacers to insulate each battery are actually necessary. Some people say it'll drain your batteries slowly if you don't have spacers. I don't know, I'm not a batteryologist.