slightly overengineered joystick fidget
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A joystick fidget with print-in-place (PIP) gimbal mount and a spring with PIP ball joint
- Ocena
- 5 / 5
- Polubienia
- 23
- Pobrania
- 139
- Wydruki
- 1
- Wyświetlenia
- 513
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Standard Digital File License
Since I had played with a gimbal mount lately I though some kind of handle would be nice, and that reminded me of control sticks on a game controller or remote control, and of fidget joysticks - so I added a spring and this is the result.
Printing: 0.4mm nozzle, standard settings.
I suggest applying fuzzy skin on the outside of the body.
I also used variable layer height on the top of the yellow stick to manually reduce layer height to about 0.1mm there, so it fells smoother.
Assembly: Loosen PIP ball joint on spring part. Stick spring center rod into gimbal (use glue if necessary). Screw gimbal with spring into base.