1 / 4
DIN slot frame for 6 SWF/Hella rocker switches
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a frame for 6 older style rocker switches from SWF/Hella. Designed to fit in a 1 DIN slot.Mine was installed…
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 48
- Wydruki
- 1
- Wyświetlenia
- 241
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (11)Powiązane
This is a frame for 6 older style rocker switches from SWF/Hella.
Designed to fit in a 1 DIN slot.
Mine was installed in a Transporter T5, upper DIN-slot.
The corners in the model are rounded a bit, but still a little bit sanding of the corners was required in my case.
Print Settings
Printer:
Creatbot F430
Rafts:
Yes
Supports:
Yes
Resolution:
0.15
Infill:
40
Notes:
Best printed switch side up.
There will be lots of supports, but they are much easier to remove this way.
Category: Automotive