CMR30 Ranger Tab Baseplate (updated)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magpul style "ranger tab" baseplate for CMR30, also with no-tab design. Variation of p38bryan's original.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 149
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A variation of p38bryan's original baseplate design! As per the description: I modded the interior design to reduce “overhang” that would sometimes grab the follower. Added dovetail style shim to eliminate need for sheet metal tab. Added additional “ranger tab” design.
I printed with 0.16 layer height which allows for the proper detail of the rear follower alignment ‘spine’ (the internal lip at the rear). This part may not actually be necessary as it seems to function fine without it. I had some print wrong and in testing, the follower didn't seem to need it, so you may find you can trim that part away.