1 / 2
Sidewalk Chalk Holder attached to Paint/Broom handle V3
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Updated version of Sidewalk Chalk Holder attached to Paint/Broom handle V2.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 54
- Wydruki
- 0
- Wyświetlenia
- 206
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (12)Powiązane
This version increases the size of the flex fingers to allow for more grip on the chalk. I also modified to top to prevent threading the nut beyond the flex fingers. I suggest printing in TPU to allow for full flex of the fingers. If printed in TPU this should last a long long time. I also suggest printing the nut in PETG or PLA. The nut part printed in TPU works just fine but it seems to work better with a firm plastic. Also a tip is to print two nuts to create a locking effect.