Centauri Carbon Filament Sensor Relocate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This project was made to better align the filament path before the filament sensor.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 117
- Wydruki
- 2
- Wyświetlenia
- 781
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
The Centauri Carbon has been a great machine for me, but I was not content with the initial filament feed path. I prefer to to print from a filament dryer box, but while doing so, the filament would bind due to the runout sensor being mounted so low. Moving the sensor up a few inches solved the problem, and still works great with the original spool holder.
This mount will require a wire extenstion for the sensor. I made my own since I already had the JST connectors on hand, but they can be purchased as well.
I included two versions, one that takes an M3 heat insert, and one that just takes a self tapping screw right into the plastic.
No supports needed.
Extra parts that may be needed: