1 / 1
.25mm Nozzle Bed Level + 1st Layer + XY Skew Test - Prusa Mini(+) — zdjęcie 1

.25mm Nozzle Bed Level + 1st Layer + XY Skew Test - Prusa Mini(+)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

THIS TEST IS FOR .25MM NOZZLE ONLY!! 3 tests in one to save time and filament. Check below links for other nozzle sizes!

Ocena
0 / 5
Polubienia
11
Pobrania
91
Wydruki
1
Wyświetlenia
492
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution — Noncommercial

Some people may not realize but the bed level test calibration that comes with the printer is only supposed to be used with 0.4mm nozzle. Other sized nozzles the recommended is to print a square/rectangle with half the diameter of the nozzle used as layer height.

For this reason, and because a lot of us like to use different sized nozzles for different prints, I decided to create this file for the different default Prusa Slicer default settings.

The GCode provided is for PLA, if you're looking to test a different material, please download the STL and adjust the definitions in the Slicer accordingly:

  • 0.10mm QUALITY Profile for 0.25mm nozzle;
  • 100% Infill and no skirt;

If you're looking to print this test for a different sized nozzle please check the links below:

I basically merged the bed level test with a 180x180mm frame so the OCD people like me can check if the XY print area is skewed from the center.

If you enjoyed this idea please leave a like and a make to give me some much appreciated feedback, I will do any necessary adjustments other users may find adequate.

Designed in Fusion 360.

Tagi