Plug-in Feeder for Versatile Filament Rewinder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This feeder is designed for 45mm spool widths, should work for 50mm spools as well.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 205
- Wydruki
- 1
- Wyświetlenia
- 1070
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a plug-in feeder for the Versatile Filament Rewinder. It is designed for 45mm spool widths, but should work for 50mm spools as well.
I suggest to print it in PETG. Support is only needed for the case. Please note that the gears need to be assembled counter-clockwise.
Extra parts required: 1 x 608 bearing, 2 × 3 mm screws (length 15mm), 4 × nuts, 2 × washers, 1 x bowden tube.
BTW: The label “40” indicates the actual linear range of the feeder. Some space is needed for the bowden tube and the filament diameter, so it's lower than the spool width.
https://www.printables.com/model/1414113-versatile-filament-rewinder