1 / 3
Anycubic Kobra 3 Cable Chain End Chain at Extruder — zdjęcie 1
1 / 3

Anycubic Kobra 3 Cable Chain End Chain at Extruder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I redesigned the end where the upper cable chain connects to the Extruder.

Ocena
0 / 5
Polubienia
13
Pobrania
159
Wydruki
0
Wyświetlenia
775
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

I redesigned the end where the upper cable chain connects to the Extruder from Anycubic Kobra 3 Cable Chain for Upper Cord by JJ Irons. 

You will need to make some trims and things depending on your extruder. I had to trim a small corner out for clearance on my AnyCubic Kobra3, but this should work just fine. 

I would suggest using my design for the start as well Anycubic Kobra 3 Cable Chain Start End for Upper Cord. 

I hope you like this update and if you appreciate it you can tip me at: https://buymeacoffee.com/deskmouse

Cheers! 

Tagi