Calendar stand - desktop calendars (T-calendar/Victoria/etc)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple calendar stand for desktop calendars. Works with a great varity of flip calendars (T-calendar/Victoria/etc)
- Ocena
- 5 / 5
- Polubienia
- 1
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 137
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Default display size (the angled side where the calendar rests): 220x160 mm
Latch gap: 0.5mm, length: 50mm (This holds the calendar in place)
If 220mm is not your desired length: Scale it along the Z axis (Z axis only, if its oriented on its side) down or up as you like. This way it wont deform the model!
If you want the display side taller/shorter than 160mm: You can scale it along the appropriate axis, but this will change the angle the calendar will rest! Default angle is 60 degrees.
I strongly recommend printing it on its side with brims!