triumph bonneville 650 model remod different base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
triumph motorbike model seperate from base (remod)
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 204
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Sculptures
- Licencja
- Creative Commons — Public Domain
here is a triuph bonneville model
It is best to print him on his side to save problems later removing the supports from the spokes.
(wow! I saw on youtube that if you use orca slicer and in the advanced tab on the support settings you can increase the Z distance to reduce the contact with the model.default is 0.2 but I shall try 0.28 to 0.34 on my next model and it should make a huge difference in the ease of removing the supports)
tree supports are the way to go… the handlebars are very fragile so bear that in mind.
I have strengthened the head light because that fell off on the first one. strangely the centre stand survives every time….
I tried it with mag wheels but it just looked too modern.
of course, now, you can change the colour of the base or if you want a fixed base you can programme a filament colour change...