Two Tone Raspberry Pi 4B Case with M3 Heat Set Inserts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two Tone Raspberry Pi 4B Case with M3 Heat Set Inserts
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A nice looking Raspberry Pi 4B Case with M3 Heat Set Inserts and mounting holes for 10 x 30mm Case Fan (optional)
This is my take on a small Raspberry Pi 4b case with M3 heat set inserts to attach the Pi to the case bottom allow for repeated screwing / unscrewing.
Note: When using the same M3 hex screws to secure the Pi to the bottom of the case, the screws are just a little bigger than the holes in the Pi circuit board, but with a little persuasion they go in fine without damaging the pi, but this is obviously done at your own risk.
Thanks for downloading, please post your makes and photos to show how you're using yours.