Zombie Token (2/2 MTG Creature Token)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 2/2 zombie creature token for MTG
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 38
- Wydruki
- 1
- Wyświetlenia
- 492
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
If you're like me, you never have enough tokens for your decks. Rather than trying to track them down or hunt for ones in packs, Ive taken to designing some of my own.
With this relatively easy multi-color print you can bring new life (or undead) to your pod/table. With proper slicer settings you can print this with one filament swap and pretty quickly!
I recommend checking the plate settings (if you dont have a MMU like me) to ensure the filament order is set correctly, Orca Slicer seems to be a little fickle with this, but setting it manually forces it into know only one swap is needed. Must be printed at a 0.2mm layer height to avoid extra filament changes, or at least with a first layer height of 0.2.
