Halloween Gift Boxes for great Nieces -Ivy & Ada
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Box and lid with pumpkin frame made on Tinkercad Mini neon lights made following YouTube video
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 47
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Autumn & Halloween
- Licencja
- Creative Commons — Public Domain
Box base made on Tinkercad.
The names were made following YouTube video:- https://www.youtube.com/watch?v=i0Oduk7Lc60
The were created using cuttle.xyz before the lid and imported in to Tinkercad and used to make a hole the shape of the name in the lid. The lid can then be printed. The name is then 3D printed with thin walls so the light can be seen.
The pumkin frame can then be printed and glued to the lid.
A LED strip was inserted into the name and held in place with an acrylic jointing compound The strip was then attached to a CR303 battery in a holder:-
https://www.printables.com/model/763855-cr2032-coin-cell-battery-holder
This holder was glued into the lid ( small hole needed to allow wires to pass through- you may wish to extend the wires). A small switch was purchased from the local model shop and a hole was cut in the side of the lid to accommodate the switch, placement is decided by the size of the name. Check that the lights comes on and then the battery cover can be glued in place.
Sunlu PLA Glow in the dark red filament was used for the names and the pumpkins.
LED strips were from AliExpress
3V COB LED Filament Flexible 300mm Edison Bulb Lamp Parts LED Diode Decoration