BTT HDMI5 v1.2 mount for TwoTrees SP5 / Sapphire Plus
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
BTT HDMI5 v1.2 mount for TwoTrees SP5 / Sapphire Plus and probably lots of other printers. Generic mount.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 164
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
I wanted to mount my HDMI5 centrally on the screen area of the SP5 base - I removed the stock screen so there was room for the cables to route through. I made this case large enough to have the screen perfectly central, cover the hole left by the original screen, and cover the Sapphire Plus logo.
I chose to measure, drill and tap some holes in the metal base, but you'd also be perfectly fine using some double sided tape or hot glue if you don't want to do that. You could even use some really short screws to make it look like you've bolted it on.