1 / 15
The Vault: World's Most Annoying Gift Box, 200 Screws | Gift Card Puzzle Box, 4 Boxes Deep — zdjęcie 1
1 / 15

The Vault: World's Most Annoying Gift Box, 200 Screws | Gift Card Puzzle Box, 4 Boxes Deep

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

200 screws and four boxes stand between them and their gift card. Print it in any two colors, screwdriver and all.

Ocena
5 / 5
Polubienia
256
Wydruki
3
Wyświetlenia
14 539
Oceny
4

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

Two hundred screws stand between them and their gift card.

It looks like a perfectly nice present: a solid box with a ribbon and a bow. Then they notice the screws. They unscrew the outside and find another box, screwed shut. Inside that, another one. Four boxes deep, the gift card finally slides out of its holder at the very center. By then everyone else has finished their presents, their cake and probably their coffee.

The Vault is the original World's Most Annoying Gift Box: four nested boxes, 200 printed screws and a gift card holder at the core. It's the most beautifully infuriating way to hand someone a gift card ever devised. A genuinely nice gift and a spectacle at the same time. That's the trick.

Every other present gets opened and forgotten while they're still unscrewing. You become the evening's entertainment, and all you have to do is hand over the screwdriver and watch.

🎁 MAKE IT THE GIFT EVERYONE TALKS ABOUT

  • Lock up a gift card for the person who's impossible to shop for

  • Fold cash or a heartfelt note into it for a graduation or a birthday

  • Bring it to the white elephant or Secret Santa swap and watch it steal the show

  • Reusable: unscrew, refill, regift. It works for the next birthday too

🖨 WHY YOU'LL LOVE PRINTING IT

  • Ready to print: the Bambu Studio 3MF has all 10 plates laid out, colored and tuned, with the circuit inlays and the only supports already painted in

  • Any two colors, plus optional two-color circuit inlays on the middle and inner boxes if your printer does multi-color. Single-color printer? Print those parts plain and the pattern stays as raised detail

  • The screw plates print all 200 working screws: 64 in the box color, 136 in the ribbon color

  • Two screwdriver designs: a mini handle for a standard 1/4 in hex flathead bit, or a fully printed one

  • Only one part needs supports, and they're already in the 3MF

  • A 14-page illustrated guide with every plate on the bed, every part labeled, the screw map and step-by-step assembly

WHAT YOU GET

  • TheVault - Bambu.3mf: Bambu Studio project with all 10 plates arranged, colored and tuned, the circuit inlays and supports already painted in

  • 15 STL files: every part, for PrusaSlicer, Orca, Cura or any other slicer

  • The Vault Print & Assembly Guide (PDF): 14 illustrated pages with every plate as it sits on the bed, every part labeled, a tick-off plate checklist, step-by-step assembly, the screw map and troubleshooting

  • Two screwdriver designs

  • Personal-use license (PDF)

PRINT SETTINGS

  • Printer: any FDM printer with a 0.4 mm nozzle. A multi-color setup is optional, only for the inlays

  • Plates: 10, in any two colors you like. Box color: the boxes, the card holder and 64 screws. Ribbon color: the bow, the ribbons, 136 screws and the inlays

  • Material: PLA, about 1 kg in all

  • Layers: screws and screwdrivers at 0.12 mm, everything else at 0.20 mm

  • Infill: 80% for the screws, 15% for the boxes, the bow and the ribbons (all set in the 3MF)

  • Supports: only under the outer box top's cross, already painted in

  • Scale: 100%, so every screw fits its hole

  • Bed: largest part 149 x 134 mm, tallest print 126 mm. Split the screw plate on beds smaller than 210 mm

HOW IT GOES TOGETHER

  • The gift card slides into the holder at the core

  • The inner box closes around it: 48 screws

  • The middle box: 72 screws

  • The outer box: 64 screws

  • Ribbons and bow: 16 screws

That's 200. The guide's screw map shows where every one goes.

FINISHED SIZE

133 x 148 x 125 mm (5.2 x 5.8 x 4.9 in) with the bow. Holds a gift card, cash or a note up to 85 x 56 x 2 mm.

PERFECT FOR

Birthdays, Christmas, graduations, white elephant and Secret Santa swaps, and anyone who tears through their presents too fast.

LICENSE

Personal use only. Print it, gift it, show it off. Please don't share or sell the files, and don't sell prints.

MORE ANNOYING GIFT BOXES

Printed one? Post a make. I'd love to see your colors, and their face at screw number 137.

Tagi