Wallmount for AVM Fritz!Box 5690 Pro
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wallmoount for AVMs current flagship Fiber Model, including cable management and a drilling template.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 71
- Wydruki
- 0
- Wyświetlenia
- 384
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to mount my router to a wall, or better cabinet, but was unable to find suitable mounts for the pro model. So i sat down and created one.
There are a total of four versions.
- Two different cutouts for the cables
- two differend depths, mainly to have a larger turning radius and enough space for the FTTx LC/APC cable and SFP.
Since the contact area is quite small, and the large ammount of air, even PLA should be fine for printing, without risking sacking from the routers temperature.
Also included:
A drilling helper, for the right distance and level mounting.
A coutnersunk washer, to avoid stressing the layer bond when using countersunk screws
Talking screws:
the non fiber Version needs screws of 12.5mm PLUS depth for your material, the fiber version needs 37.5mm PLUS. Up to 6mm diameter and 10mm Heads.
I'd suggest looking at 4.5x20 or 4.5x45mm for example
Printing:
- 0.2-0.25mm Layers
- 5-4 Top/Bottom
- 3 Perimerter/Walls
- 15% Cubic Infill
- no supports, print as downloaded
- brim as needed for the washer/drilling helper
- print two instances of the desired mount (obviously ;) )