Hair drier Technostar HD 2000 diffuser/accessory repair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An adapter ring to fix the attachment of various accessories on a Technostar HD 2000 hair dryer.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 1042
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
An adapter ring to fix the attachment of various accessories on a Technostar HD 2000 hair dryer.
The teeth on all the bundled accessories of this hair dryer are prone to failure. They either get scraped (failing to snap in place after just a few uses) or deform due to heat, not holding in position anymore.
This adapter snaps tightly into the remaining teeth of the accessory so that it can further snap again into the original recess of the dryer.
Needs to be printed into a heat-resistant material, such as polycarbonate.
PETG is not enough for the diffuser, although seems to work for the other ones.
Print as given, no supports required.