1 / 1
SN-1 Rudder Pedals Comfort Pads
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SN-1 Rudder Pedals Comfort Pads
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 172
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Recommended tape to finish it off: https://aliexpress.com/item/1005009201004263.html
Hardware required
2pcs M8x150
2pcs M8 Nut
Print settings:
No supports (model has built in supports)
6 Walls
30% infill
Has space for these microswitches:
https://www.xump.com/science/push-button-momentary-switch-wl.cfm
You can either solder them to a different board or directly to the STM32 bluepill board that's inside these pedals, it's running freejoy firmware so you can configure it with freejoy Configurator.
