v3.0 Makita & Festool track router base plate.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the same popular design as the v2.0 but now it has a built-in vacuum port !
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 187
- Wydruki
- 2
- Wyświetlenia
- 870
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Introducing the version 3.0 track router base plate. like the previous versions it fits plunge saw tracks from Makita, Festool, Milwaukee and Evolution. now in 3 sizes, 2.5in and 3in and 75mm. Built in 1in (26mm) ID vacuum port
Note. There are no threads designed in, I just used the knob to make threads, it worked ok for me.
The 2.5in variant also fits in the Makita packout insert without removing it from the router. That can be found here. https://www.printables.com/model/964496-v2-makita-router-packout-insert-40v-xgt-18v all veriants fit the makita MAKPAK box insert fond her
Print settings recommend.
Wall loops. 3
Infill. 20%to 30% grid. with a thicker bottom layer 5-7. I also like 0.6 on the sparse infill line width
Print orientation. Flat on the build plate. (bottom down)
Also recommend rotating 45⁰ if needed so that support is oriented along the part. (length wise)
Filament. PETG-CF, PETG, PCTG, NYLON -C
Supports. Snug normal. “On build plate only” turned on