1 / 7
Remote Holder with Optional Accent Piece
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modern, print-friendly holder for three remotes with a sleek optional accent sleeve.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 21
- Wydruki
- 3
- Wyświetlenia
- 89
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Share Alike
Triple Remote Holder with Optional Accent Piece
This remote holder is designed to hold three small remotes.
The model has been optimized for printing with a 0.4 mm nozzle to reduce print time, minimize filament use, and ensure reliable results without sacrificing strength or appearance.
📏 Dimensions
Maximum remote size thickness: 42 mm × 24 mm
⚙ Print Settings
- 3 walls
- 5 bottom layers
- 5 top layers
- 25 % aligned rectilinear infill
💡 Helpful Tips
You can customize your holder by adding an accent color piece, which slides over the main body with a snug friction fit.
- When installing the accent piece, it’s recommended to apply a small drop of super glue at each end after sliding it into place.
- Gently pull back the edge just enough to apply the glue — avoid pulling too far, as the piece may crack. - If you print the main body with “Fuzzy Skin” and plan to add the accent piece, expect an extremely tight fit.
- The accent edges may flex slightly outward — this is normal. Apply a small drop of glue, press or clamp the parts together, and hold until the glue cures. - When printing the Accent piece, use a brim or mouse ears to help prevent warping.