1 / 3
Derpy Tiger Wall Decor KPOP DEMON HUNTERS
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Derpy and Sussie Line Art This is a line art model featuring Derpy and Sussie.
- Ocena
- 5 / 5
- Polubienia
- 134
- Pobrania
- 771
- Wydruki
- 9
- Wyświetlenia
- 1893
- Oceny
- 10
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 9) (Komentarze: 10)Remiksy (0)Kolekcje (201)Powiązane
Derpy and Sussie Line Art
This is a line art model featuring Derpy and Sussie.
- Uses about 55g of filament at the default size.
- Can be scaled down to fit an A1 mini or scaled up for larger printers.
- Make it as thick or thin as you want. I don't recommend going thinner than 3 mm but it can save some filament. Or go thicker if you want it to stand up straight on it's own.
- Important: Wait until the print bed is fully cooled before removing the model to avoid breaking it.
TIPS:
- Wash your build plate with hot water and soap.
- Use Arachne Wall Generator to best preserve quality.
- I have placed 10 brim ears on points with a lot of stress, you can turn them off by going to Other > Brim Type > No-Brim, but they are very easy to remove and help wtih adhesion.
- Bump up your bed plate temperature by 5 degrees.
- Use Avoid Crossing Wall setting at 200-300 mm to have less stringing.
- If your have a P1/X1/H2 series printer, consider turning off Aux Fan, otherwise the part the aux fan is on might warp!