Slim Version: Snapmaker 2.0 Tool Head Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
More streamlined version of my existing toolhead storage. Holds two at a time.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 36
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a streamlined version of my initial Snapmaker2.0 Tool Head Storage. This model only holds two at a time. You can print additional holder and connect via the pins that are inserted on the sides of the models.
If you have printed the larger holder, I have made a friction fit adapter that you connect in the center of both models.
I am currently printing to test the overall fit of the models. Please use with caution until I update this summary. The adapter and pins could be resized based on the calibration on your printers.
I am currently printing these models in PETG. The small version should fit most printers with a larger z height. This model will fit on the Snapmaker2.0 and PrusaXL