Sanchez 3in Canopy for Caddx Turtle with Cooling Ducts
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
07/26/19 update: I've added a version that includes recesses for M2 nuts, to better hold the canopy on. I decided to…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
07/26/19 update: I've added a version that includes recesses for M2 nuts, to better hold the canopy on.
I decided to make a version of this canopy with cooling ducts to let out some of the heat generated by the VTX and the camera's circuit board. It gets pretty hot in there and I think this will help quite a bit.
I also enlarged the lens opening in width and height to allow for some air to enter in the front around the lens and also to allow a bit more space for an ND filter if you'd like to use one.
My print was done at 0.3mm and you can tell by the pic that it's a bit rough looking with the large layer size. I wanted to print it fast and get it installed but it would definitely look nicer at 0.2mm
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
.3
Infill:
100%
Filament: Priline TPU Black
Notes:
Supports printed touching buildplate with Support Line Width at 0.3mm, Support Z Distance at 0.2mm, Support Interface enabled, Support Interface Density at 30%.
Category: R/C Vehicles