Decathlon Roundnet Spikeball Replacement Leg
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Roundnet Replacement Leg for Decathlon Roundnet Kit
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Roundnet Replacement Leg
One of the legs broke on a Decathlon Roundnet/Spike ball kit (https://www.decathlon.com.au/p/roundnet-set-recycled-black-kipsta-8647739.html) after a friend fell on it. I designed this to replace it. I tried to minimise the amount of plastic needed.
The fit is a nice press fit, a bit tighter than the original but still removeable.
It takes about 110g of material.
I would recommend an inner and outer brim.
I've printed the first replacement in PLA at 100% XY scaling. If it doesn't hold up, I will try again with ABS and maybe print at 101% XY scale for a looser fit.