Simple UV curing station
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple UV curing station for SLA printed things for less than $25.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 109
- Wydruki
- 0
- Wyświetlenia
- 967
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Simple UV curing station for SLA printed things for less than $25. Can fit objects up to 6 inches in height and 6 inches diameter.
Items needed
UV LED strip — https://amzn.to/2Q0tg9M
Turntable — https://amzn.to/2Z2P34P (no batteries required, the UV light powers it)
Barrel plug — https://amzn.to/2PtM4iJ (optional)
Print instructions
I printed mine with CF PLA(https://amzn.to/35xsPdF) for added sturdiness. Caution is advised with the door hinges as they can break off under too much force. Can be easily modded to replace them with metal rods later on (mine still hold up fine though).
CAREFUL with UV lights, don't look at the beam for too long or too close as it can burn your cornea! If you feel like sandpaper in your eyes, it's too late. You've been warned.