1 / 4
VESA Monitor Speaker Mount (Denon Envaya Mini) - Easy Print — zdjęcie 1
1 / 4

VESA Monitor Speaker Mount (Denon Envaya Mini) - Easy Print

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a speaker mount fitted for the VESA mount of a LG 34GN850-B monitor and a Denon Envaya Mini bluetooth speaker.

Ocena
0 / 5
Polubienia
3
Pobrania
20
Wydruki
0
Wyświetlenia
169
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I built this model for two reasons, first I wanted to declutter my desk and try to hide as many cables as I could and seI built this model for two reasons, first I wanted to declutter my desk and try to hide as many cables as I could and second I wanted to be able to move the monitor including the speaker freely to the front of the desk when I use it for sim racing.

The mount is designed to fit the back of a LG 34GN850-B monitor so it could be mounted directly to the lower two screws of the VESA mount with the standard screws. It may fit other monitors too but this needs to be tested or you could adjust the model to your needs. You will need two M4 heat set threaded inserts and two M4 x 16mm countersunk screws to attach the bottom part to the top part.

To obtain the parts for both sides, the two components must be printed once in their original orientation and once mirrored.To obtain the parts for both sides, the two components must be printed once in their original orientation and once mirrored.

I've printed it in Prusament PETG with the default 0.2mm Speed preset without supports and had no issues.

Tagi