Anderson Power style (SB50) 50 amp connector housing (Dual Plug)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
By request, I created these parts to mount 2 Anderson Power style (SB50) 50 amp connectors side-by-side.
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 256
- Wydruki
- 1
- Wyświetlenia
- 802
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a dual side-by-side style Anderson Power style (SB50) 50 amp connector mount. It is comprised of two components, the base plate and the top cover to house the SB50 plugs. The components feature a small channel around each of the front mounting holes to capture a small cable of a dust cover and the top cover form fits to the SB50 connectors.
For the final components I used PETG but it prints just as well in PLA.
The cover component is best printed in an upright position using a skirt of 3-5mm for additional stability while printing. This orientation does not require any additional support.
See Also:
My original single Anderson Power style (SB50) connector housing model.