Braided Sleeving Bullet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple "bullet" to help feed wires into braided sleeving. UPDATED 10-04-2024
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 232
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
UPDATED: 10-04-2024 @falo advised there is a gap between the top and the cylinder. I uploaded fixed files to eliminate this gap.
Just a heads up if you need larger or smaller sizes you can resize this in your slicer software of choice.
"bullets" to shove bare wires into to make it easier to feed them through braided sleeving. I typically use some tape to secure it on the wires to keep them from popping out.
Example of sleeving: https://www.amazon.com/Expandable-Braided-Sleeving-Sheathing-Tubing/dp/B0714M1DCC
there are 2 sizes included: 6mm & 10mm, I use some electrical tape to make sure the wires don't come out while pushing them through.