1 / 1
Rotating stand for earrings, rings and small necklaces, expandable - REMIX
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Remix of the rotating stand from @habitaritus_1315814 to fit the Core ONE build plate and other tweaks
- Ocena
- 5 / 5
- Polubienia
- 40
- Pobrania
- 119
- Wydruki
- 1
- Wyświetlenia
- 669
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Fashion Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (10)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (46)Powiązane
This is a remix of the rotating earring holder to solve some of the issues I was having. The biggest one was the rotating ring holder not fitting on the Core ONE build plate.
I would recommend increasing the wall count to 4 when printing to add strength. Below are the modifications made. It was remodeled so I don't know how cross compatible the files are with the original.
- The rotating ring holder was modified to fit the Core ONE build plate.
- The dimensions on the connectors and cap files were modified to solve issues users were having.
- Added a recessed area for rubber feet on the base. 12x2mm Rubber Feet from Amazon (Non Affiliate link)
- Added a spacer for the rotating earring box. This is so the base can be used with or without the earring holder boxes.
- Added a small gap so all the rotating ring files can be rotated independently of each other including the rotating box.
- The connectors and spacer can be glued together without stopping the rotation. Just be careful not to glue the rings to the connector pieces. I used E6000 glue in the photo.
- Modified the connectors so any of them can be used with the base.