Full-Scale Scythe Prop (Fits Standard Broom Handle)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Life-size scythe - easy two-part print, fits standard broom handle, perfect for Halloween, cosplay, or décor!
- Ocena
- 0 / 5
- Polubienia
- 60
- Pobrania
- 315
- Wydruki
- 1
- Wyświetlenia
- 1040
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Get ready for Halloween with this full-scale 3D-printed scythe!
Overall dimensions: 444mm x 200mm x 30mm
This scythe was designed as a prop for my own costume after I couldn't find any online models that matched the look I wanted - so I decided to make one myself. The result is a sleek, easy-to-assemble, and easily printable model that attaches directly to a standard broom handle (¾" diameter, ¾-5 ACME threads).
The design is split into two printable sections, each small enough to fit on build plates as compact as 210mm x 210mm, which are then connected together with two custom dowel pins. Whether you're making a Halloween costume, a cosplay prop, or just something fun to hang in the garage and spook your neighbors, this model is for you!
This print was made to be both practical and dramatic - a clean, durable design that feels great to hold and looks even better in costume photos. It's been a blast to create, and I hope it brings the same excitement and Halloween spirit to your prints as it has to mine!
Print Details
- SCYTHE_PT1 x1
- SCYTHE_PT2 x1
- SCYTHE_DOWEL x2
This model was printed and tested using Polymaker Polylite PLA Pro, but feel free to use any material you want! The square dowels (6.25mm square cross section) and mating holes (6.60mm square cross section) are designed for a snug, reliable fit with a well-tuned printer - no sanding or supports needed for the dowels nor the holes should be necessary. The square makes both parts easier to print (vs a round cross section).
Recommended Settings:
Nozzle: 0.6mm
Layer Height: 0.25mm
Infill: I used 15% Gyroid infill, but feel free to experiment!
Support Notes:
- SCYTHE_PT1: Prints cleanly without supports, but ensure your overhang settings are tuned for the threaded broom connection area. If you're not confident, I recommend supports in this area, but I printed without.
- SCYTHE_PT2: Requires support beneath the tip for best results.
Assembly
Assembly couldn't be easier:
- Print all parts in the quantities above.
- Glue or lightly epoxy the two dowel pins into on half of the scythe.
- Apply a small amount of adhesive to the mating holes on the other half.
- Press the halves together and let cure. No extra hardware required!
- Attach your trusty broom handle, and you're ready to reap!