Chair Caster felt holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I have hardwood floor, and my office chair with caster wheels is not so good for this floor.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 338
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution
I have hardwood floor, and my office chair with caster wheels is not so good for this floor. I used to have a small rug just so that chair can sit in one place. Instead I designed a small felt holder caster cup which can slide into the place of the wheel. It has edges which fit inside the end of each leg. You need to print 5 of these, and they fit snug. Then cut a piece of felt (you can buy large 4"x4" felt pads at HomeDepot) and stick underside. Now the chair sits safely on the hardwood without moving.
If you have a chair with middle pole sticking out then use the long version.
Print instructions
Category: Office How I Designed This
Designed in Fusion 360. I have not made it to use any parameters. SO you will have to edit the featurs if you want to edit.