1 / 8
4010 Silencer for Bullseye fan duct
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Muffler designed for the heat brake cooling fan for the Petsfang Bullseye fan duct for Ender 3. Tested with Bullseye…
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 899
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Muffler designed for the heat brake cooling fan for the Petsfang Bullseye fan duct for Ender 3.
Tested with Bullseye on Ender 3 Pro, should fit all Ender 3 printers with Bullseye modification.
Print laying flat on its face as shown in the picture below with 100% infill.
The print in the images was printed with 0.4mm nossle, 0.2mm layer height.
Printing Orientation
Category: 3D Printer Parts