Xu Xialing Rope Dart - Shang Chi and the Legend of the Ten Rings - FDM/MSLA
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Xu Xialing's Rope Dart used to fight the Dweller-In-Darkness during Act 3 of Shang Chi and the Legend of the Ten Rings…
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 1201
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Xu Xialing's Rope Dart used to fight the Dweller-In-Darkness during Act 3 of Shang Chi and the Legend of the Ten Rings
Note, there is a lot of freehand carving involved with the making of this prop to gain an obsidian-like texture for the blade and hammer.
Print:
RopeDartHilt x 1
RopeDartBlade x 1
RopeDartHammerHalf x 1
RopeDartHammerOtherHalf x1
RopeDartHammerHandle x 1
Post-Printing
There is a lot of sanding/grinding to this prop build.
I used Chitubox's in slicer hollowing and hole functions to make space for the fairy lights which are optional to make the blade and hammer glow. Print all the pieces out of elegoo transparent red.
For the blade, use a rotary tool (dremel) to carve out the texture grooves. Please wear the appropriate PPE so you dont get resin dust in your lungs.For the counterweight hammer, resin fuse the two halves of the meteor hammer together. Sand the handle until it fits into the top hole of the now fused halves. Use a rotary tool (dremel) to carve out the texture grooves. Please wear the appropriate PPE so you dont get resin dust in your lungs.
Metal Rings are 1.5" keyrings off of ebay and the rope is 1.25 macrame cotton off of amazon.
Category: Costume