1 / 4
Tapo C120 outdoor camera wall corner mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A model to mount the Tapo C120 wifi security camera to a wall corner either outside or inside.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 210
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
A wall mount for the wifi security camera Tapo C120.
The model is made to be placed in a wall corner and is angled 8 degrees down to get a better view over the area.
The model consists of two parts, a wall mount and a camera holder.
The camera holder is screwed into the wall mount with the use of three Philips 2.5x10mm self-tapping screws, i got mine from two packs of Makerworld usb LED lights.
If it is to be placed without any roof or cover from the elements you should be using stainless steel screws.
Mounting:
- Place camera in the camera holder, while doing that plug the cable into the camera with the cable going out the cable hole.
- After plugging the cable into the camera, place the base parallel to the camera with the feet pointing towards the wall mount.
- After all is done, i recommend plugging the camera in to test if it works.
- Place the wall mount into the camera holder and then screw in the three screws (remember not to screw it too hard since it can crack the plastic).
- Mount it to the wall corner (Also, don’t screw it so hard here either since it might crack the plastic).A wall mount for the wifi security camera Tapo C120.