1 / 5
Shinra PHS Cosplay Phone Accessory– Final Fantasy VII: Remake - FDM/MSLA — zdjęcie 1
1 / 5

Shinra PHS Cosplay Phone Accessory– Final Fantasy VII: Remake - FDM/MSLA

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Make any cell phone into a Shinra Issued PHS! The perfect look for any Board Director, Turk, or S.O.L.D.I.E.R.…

Ocena
0 / 5
Polubienia
29
Pobrania
57
Wydruki
0
Wyświetlenia
928
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Make any cell phone into a Shinra Issued PHS! The perfect look for any Board Director, Turk, or S.O.L.D.I.E.R.

Disclaimer: These PHS accessories are just for visual style and DO NOT protect a phone from any drops, bumps, screen breakage, monster attacks, plate drops, helicopter crashes, deepground incursions, ninja ambushes, or forays into the Northern Crater.

This model is designed for a Samsung S8 cell phone (68.1 x 148.9 x 8.0 mm) with built in tolerances, but you can modify the model in any slicer by changing the X, Y, and Z dimensions to fit any phone. For example if you need to make this fit an iPhone12 (71.5 x 146.7 x 7.4mm), unlink the scaling in the slicer, and change the X to 105%, Y to 98%, and Z to 93%. If the tolerance is just slightly too loose, you can use a small bubble of tape to hold the accessory in place.

For easier printing on a FDM printer, slice the model in ½ and lay the flat sides onto the bed. Be sure to add a brim and use supports as the surface area attached to the plate is pretty small. Glue them together.

Print Settings

Printer:

Elegoo Saturn

Rafts:

Yes

Supports:

Yes

Resolution:

0.05

Infill:

100

Filament:

Elegoo Grey Photopolymer Resin

Grey


Notes:

These models also successfully print using Silky Silver PLA on an FDM machine.

For easier printing on a FDM printer, slice the model in ½ and lay the flat sides onto the bed. Be sure to add a brim and use supports as the surface area attached to the plate is pretty small. Glue them together.

Category: Costume

Tagi