Mujika's Lanturn - The Promised Neverland - FDM
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mujika's Lantern. What Season 2?
- Ocena
- 0 / 5
- Polubienia
- 24
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 546
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Cosplay & Costumes in general
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Mujika's Lantern - The Promised Neverland Manga
This is for all the escaped children and cosplayers looking for something to light their way from the horrors of the non-existent S2.
Handle x 1
Top x 1
Bottom x1
Lock x1
Plant Holder x 1
Strut x 6
Crystal x3
Print everything and assemble with superglue/hot glue. Use a heat gun to widen the peg holes if the tolerance is too tight for the struts to fit into the base and top. Do this before gluing into place.
Prop was printed in silky silver PLA and left unpainted before assembly. The middle planter is covering the electrical LED lights with built in resistors and a battery pack.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
Yes
Resolution:
0.10
Infill:
20%
Filament: Sunlu PLA Silky Silver
Category: Costume