Diy 3D printed WAGO 221 series connector DIN Rail mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Diy 3D printed WAGO 221 series connector DIN Rail mount + Wago connector 3d Model
- Ocena
- 4 / 5
- Polubienia
- 319
- Pobrania
- 674
- Wydruki
- 1
- Wyświetlenia
- 6387
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my version of a WAGO 221 series Connector DIN Rail Mount. (35mm X 7.5mm Rail size) Each different rail mount size has 2 different parts. Support for 5, 10, 20 connectors. These parts were made to 3d print without supports and a currently in the process of refining the design. I have also included a 3d step Model of the 221 series connector. Feel free to use it in any way u like. Connector part number: 221-2401
Please leave a comment if u have any design or print recommendations. A photo of your print would also be appreciated.
