1 / 5
Minecraft Torch Lamp (No-Magnet Remix by Voxel Forge) — zdjęcie 1
1 / 5

Minecraft Torch Lamp (No-Magnet Remix by Voxel Forge)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a remix of the fantastic "Torch Light" (Model #106950) by the talented creator Michal Fanta.

Ocena
4 / 5
Polubienia
174
Pobrania
292
Wydruki
0
Wyświetlenia
2493
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Video Games
Licencja
Creative Commons — Attribution — Noncommercial

Minecraft Torch Lamp (No-Magnet Remix by Voxel Forge)

Hi, I'm Voxel Forge. I loved the original design but wanted to create a version that could be assembled without having to source specific magnets.

My version replaces the magnet-based mounting system with a simple attachment. This provides a secure connection using only the 3D printed parts.

Bill of Materials (What you'll need):

1. Printed Parts:

  • Torch_Flame.stl
  • Torch_Handle.stl
  • Torch_Holder.stl

2. Non-Printed Parts / Electronics:

  • A power cable
  • An in-line lamp switch
  • A candelabra bulb socket (commonly E12 in North America or E14 in Europe)
  • A candelabra-style LED bulb (LED is recommended to avoid heat)

Printing Instructions:

  • Flame/Diffuser: For the best lighting effect, print this part in a white, natural, or translucent filament with Lightning infill (PETG or PLA works well).
  • Handle/Body: Print this in a brown, black, or wood-look PLA.
  • Torch Holder: Print this in any color.
  • Supports: No supports should be needed.

Assembly & Wiring Instructions:

Disclaimer: Please be careful and take all necessary safety precautions when working with electricity. If you are not comfortable with wiring, please consult someone who is.

  1. Wire the Electronics: Feed the power cable up through the bottom of the printed Torch_Handle. Wire the in-line switch onto the cable at your desired position. Finally, securely connect the wires to the candelabra bulb socket.
  2. Install the Socket: Gently press-fit or secure the bulb socket into its designated spot at the top of the Torch_Handle.
  3. Attach the Flame: Screw in your LED bulb. Then, simply attach the Torch_Flame part onto the handle. No glue or magnets required!

Check out the video!

I made a short video of the build on TikTok. You can watch it here:

Minecraft Torch TikTok

Check my Web Page!

Voxel Forge

Credits & Original Design:

This is a remix, and all credit for the brilliant original concept and design goes to Michal Fanta. Please be sure to visit the original page and give it a like!

 

Tagi