TrailManor RV Door Catch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement for the factory door catch on a TrailManor camper trailer.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 198
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Public Domain
I modeled this after a broken door catch from a 2008 TrailManor 2720. It's part #18073 in the 2013 parts catalog. I made some assumptions since I didn't have the whole part, but it works as intended using the OEM roll pin and spring.
Print in ASA for best outdoor longevity. This is a tiny part so there's no reason not to print it solid or nearly solid. Don't save 25¢ of filament just to have it break in a gust of wind. I used a 7/64" Drill bit to clear out the hole in the catch and a 3/32" bit on the base so the roll pin will stick in the base and slide in the catch. It might be better to do it the other way, though.
I've included the SolidWorks file for easy customization, but don't look at it too hard. It's messy.