Foldable Driver Stand v2a
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improved foldable driver stand uses less supports which are easier to remove.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is a redesign of my original Folding Driver Stande model which has extensive documentation: https://www.printables.com/model/1403092-folding-driver-stand
The primary goal was to remove unnecessary supports, especially on the hinge stops which proved troublesome to remove. This was accomplished by making the stops close to vertical instead of horizontal.
Short video showing postprocessing (skip to 2:04 for breaking the hinges free):
The secondary goal was to simplify the FreeCAD design, mainly by choosing a better origin.
The third goal was better aesthetics, thus the filament eliminating diamonds and the tube dimensions printed on the base.
I recommend using support material at least for the interface.
Enjoy!