Wahl Electric Trimmer Button (no glue)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a replacement button for the Wahl Beard Trimmer (9818A) but may work for other models too. Clips in, no glue.
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 128
- Wydruki
- 1
- Wyświetlenia
- 373
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Share Alike
This is a replacement button for the Wahl Beard Trimmer (9818A) but may work for other models too. I didn't want to have to glue the button in so it clips in just like the original button does.
The model is designed to be printed in TPU (button face) and PLA (clips), but it may also be printed completely in PLA or PETG and should clip in fine.
Print with the button face down and no supports. If the thin clips don't print neatly, try adding an extra copy or two to the bed to increase layer printing time.
No need to fully disassemble your trimmer to replace the button. Gently pull out any remnants of the old button, then clip the new one in. I suggest starting by clipping in the two feet towards the top of the trimmer (toward the blades) first, then gently flexing and pushing in the other clips.
Gcode included just for an example and times. You should always slice your own.