Ubiquiti UniFi Express 7 + Power Adapter 10" Rack Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A clean, compact 3D-printed 1U rack mount for the Ubiquiti UniFi Express 7 router and its matching power adapter.
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 198
- Wydruki
- 0
- Wyświetlenia
- 1049
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial
Overview
This model is a 10-inch rack mount for the Ubiquiti UniFi Express 7 router and its power adapter, designed for small home network setups and compact racks. It keeps your networking gear neatly mounted with full access to ports, buttons, and ventilation.
6 Thickness versions are included to suit your rack preference – one with and without the Ubiquiti logo. (The ones you see in my pictures are 5mm thick)
Features
Fits Ubiquiti UniFi Express 7 (UX7) and Ubiquiti power adapter
10-inch rack width – fits mini network cabinets
Front panel with UniFi logo cutout and vent holes
Integrated cable pass-through for power
Clean aesthetic with flush mounting and rounded corners
Print Settings
Material: PETG or ASA recommended (for heat resistance)
Layer height: 0.2 mm
Infill: 20–25%
Supports: None required
Orientation: Print face-down for best finish on the front panel
Notes
Tested with Ubiquiti UniFi Express 7 and stock power adapter.
Designed with proper vent clearance to avoid overheating.
Recommended Print Orientation
Print the model flat with the face down on the build plate. No supports are needed. PETG is preferred for durability and minor flex when inserting devices.
