1 / 1
Beretta Choke Tube Cylinder Holder — zdjęcie 1

Beretta Choke Tube Cylinder Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a holder for Beretta 12ga choke tube CYLINDERS. Medium and Small in the 6 different patterns (constrictions)

Ocena
0 / 5
Polubienia
2
Pobrania
10
Wydruki
0
Wyświetlenia
135
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is a holder for the clear plastic Beretta choke tube cylinders.  I have these with my Optima-Choke HP choke tubes.  We use it in the safe to organize the choke tubes.  It isn't suitable to take to the range; we use a choke tube case for that.  The holes in the block are slanted to match the slant of the clear plastic cylinders (the Beretta choke tube cylinders aren't straight cylinders, they have a slight taper).

Beretta calls these cylinders Medium (for the extended color-coded choke tubes) and Small (for the flush choke tubes).  In the holder, the 6 Small ones are in the front and the 12 Medium ones are in the back.  There is a step in the block.

The model is a 2-color print on my XL.  The first color is the base and the second color is the raised text.  

  • Material 1: PLA, Polymaker PolyLite Black
  • Material 2: PLA, Polymaker PolyLite White

If you have a 1-color printer, you can use a silver or gold Sharpe to easily color the raised test.  If you want recessed text instead, just lower the text height and subtract the text from the block (using the text as a negative material in Prusa Slicer, or do a boolean subtraction in the OpenSCAD model before generating the STL file).

The OpenSCAD model is attached (_v4).  I created the two materials separately (_v4a.stl and _v4b.stl) simply by commenting out the respective lines at the bottom of the OpenSCAD model (a comment says what to do).  This makes it easy to import into Prusa Slicer and position the raised text for the amount of “raise” as desired.

Beretta sells the choke tube cylinders for $5 on their web page; and they also come when buying single choke tubes.

I didn't have any problems with the 1st layer printing and the model easily printed to completion.  I did not attempt to adjust the resolution for the raised text; it came out OK, but that is one easy area for refinement.