Sidewalls for Trådfri E1743 on off switch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sidewalls stopping the switch from sliding off sideways.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 68
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Public Domain
We got sick of the Trådfri IKEA switch sliding off sideways, and falling to the floor. After a while you get so pro at not dropping it, until it becomes dark and you fumble after the switch, and then boing boing boink, it's on the floor again.
This model is placed around the mount plate that comes with the switch, and it gives the switch some sidewalls to stop it from sliding out of the mount plate. It works great, and I can still pull the switch out easily if I want to. I have also added a second 3D model for screwing the mount plate into.
On the bottom side, there are pits for mounting 1mm thick x 19 mm wide double sided tape. I'm using a double sided tape ordered from TEMU.
Slicer settings: 0.15mm QUALITY, PLA, 15% infill. Bottom side as firstlayer. Ignore overhang warning.