PB Swiss Tools inbus set mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed this mount especially for this inbus set: https://www.pbswisstools.com/de/werkzeuge/quality-hand-…
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 136
- Wydruki
- 3
- Wyświetlenia
- 1970
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this mount especially for this inbus set: https://www.pbswisstools.com/de/werkzeuge/quality-hand-tools/winkelschraubenzieher/produkt/pb-212lh-5-rb/
It's designed to mount on a peg board with 15mm spacing.
I used M3 brass inserts to screw it in from the back of the peg board.
[M3x4mmx4mm]:
I recommend printing the part with multiple colors with the filament swap technique. If you don't know how its done: https://blog.prusaprinters.org/color-print/
If you have a prusa printer you can also use my presliced gcode here:
https://www.prusaprinters.org/prints/4465-universal-caliper-mount
Please share your prints ;)
The caliper mount you see on the first picture is also designed by me:
https://www.prusaprinters.org/prints/4465-universal-caliper-mount
Print instructions
I used Prusament PLA Galaxy Black and White filament.