Carpet Riser for SVS SoundPath Isolation Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Riser (spacer) for SVS SoundPath Subwoofer Isolation System.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 86
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I recently purchased a pair of SVS PC2000 Pro down-firing subwoofers, which come standard with the SVS SoundPath Isolation feet installed. Due to my thick carpet, the driver cones were very close to the carpet.
This model acts as a 10mm spacer between the steel part of the isolation foot and the subwoofer body, compensating for how far the feet sink into the carpet. Simply remove the screws holding each foot, insert this spacer (flat side towards subwoofer) on each, and re-install the screws.
On my SVS PC2000's, the original screws still had plenty of thread engagement (over 25mm) even after adding this spacer. If the screws holding your SoundPath isolation feet are shorter, you may need to source longer screws.