Handle for four-sided (cheese/vegetable) grater
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Don't toss that grater just because the crappy plastic handle broke off, print one of these instead!
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 151
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial
Not everything needs to be disposed of as soon as it breaks. The metal part of my grater was still functional when the original handle broke off, but it was uncomfortable to use. I designed this replacement handle to attach to the top of the metal part. My grater was 84mm x 60.5mm at the top, and the handle had two tabs near the bottom that engaged with stamped catches on the metal part. I am guessing most cheap kitchen graters work similarly. Might be a tight fit when pushing handle onto metal part, be careful not to cut yourself.
Printing instructions:
- Almost any layer height should do, 0.2 in the sample project file worked well.
- 3 perimeters.
- 15% gyroid infill.
- Supports required for the handle and parts of the base (see sample project and pictures). Recommend organic supports for ease of removal.
- PLA or PETG
- Not dishwasher safe
- Not food safe. Hand wash with soap and warm water after using. Dry completely before using again.